2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

REMOVAL

Removal / installation · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


1. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY
(Click here)

2. REMOVE CAMSHAFT
(Click here)

3. REMOVE NO. 1 VALVE ROCKER ARM SUB-ASSEMBLY
  1. Remove the 32 valve rocker arms from the cylinder heads.

    HINT:
    Arrange the removed parts in the correct order.


4. REMOVE VALVE LASH ADJUSTER ASSEMBLY
  1. Remove the 32 valve lash adjusters from the cylinder heads.

    HINT:
    Arrange the removed parts in the correct order.


5. REMOVE VALVE STEM CAP
  1. Remove the 32 valve stem caps from the cylinder heads.

    HINT:
    Arrange the removed parts in the correct order.


6. REMOVE CYLINDER HEAD SUB-ASSEMBLY LH

  1. A160736E05
    Uniformly loosen and remove the 2 bolts in the sequence shown in the illustration.

  1. A160737E05
    Using a 10 mm bi-hexagon wrench, uniformly loosen the 10 cylinder head bolts in the sequence shown in the illustration. Remove the 10 cylinder head bolts and plate washers.

    NOTICE:
    1. Be careful not to drop washers into the cylinder head.
    2. Head warpage or cracking could result from removing bolts in an incorrect order.

    HINT:
    Be sure to arrange the removed parts for each installation position separately.

  1. Remove the cylinder head and gasket.


7. REMOVE CYLINDER HEAD SUB-ASSEMBLY RH

  1. A160738E04
    Uniformly loosen and remove the 2 bolts in the sequence shown in the illustration.

  1. A160739E03
    Using a 10 mm bi-hexagon wrench, uniformly loosen the 10 cylinder head bolts in the sequence shown in the illustration. Remove the 10 cylinder head bolts and plate washers.

    NOTICE:
    1. Be careful not to drop washers into the cylinder head.
    2. Head warpage or cracking could result from removing bolts in an incorrect order.

    HINT:
    Be sure to arrange the removed parts for each installation position separately.

  1. Remove the cylinder head and gasket.

← COMPONENTS (from Sep 2011)REMOVAL (from Jan 2012) →