Television Display does not Turn ON
Circuit diagnosis · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
INSPECTION PROCEDURE
| 1. CLEAN INFRARED RAY RECEIVING PORTION |
 |
- Clean the infrared ray receiving portion on the television display assembly.
Check whether the same malfunction occurs.
- OK:
- The function returns to normal.
|
NG |
 |
|
|
|
| OK |
|
 |
|
|
| 2. CHECK SYSTEM |
 |
- Check that the remote control operation of the rear system is not locked by the multi-display assembly.
Check that "Rear System Lock" is Off on the "General Settings" screen.
- OK:
- "Rear System Lock" is Off.
|
NG |
 |
|
|
|
| OK |
|
 |
|
| 3. CHECK REMOTE CONTROL (BATTERY) |
 |
Check that the dry-cell battery of the remote control is not depleted.
- OK:
- Battery is not depleted.
|
NG |
 |
|
| REPLACE REMOTE CONTROL BATTERY |
|
|
| OK |
|
 |
|
| 4. REPLACE REMOTE CONTROL |
 |
Replace the remote control with a new or known good one.
Check that the television display assembly turns on.
- OK:
- The television display assembly turns on.
|
NG |
 |
|
|
|
| OK |
|
 |
|
| END (REMOTE CONTROL WAS DEFECTIVE) |
|