Sound from Wireless Headphones is Difficult to Hear, cannot be Heard, or Quality is Poor
Circuit diagnosis · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
INSPECTION PROCEDURE
| 1. CHECK WIRELESS HEADPHONE (BATTERY) |
 |
Check that the dry-cell battery of the wireless headphone is not depleted.
- OK:
- Battery is not depleted.
|
NG |
 |
|
| REPLACE WIRELESS HEADPHONE BATTERY |
|
|
| OK |
|
 |
|
| 2. CHECK WIRELESS HEADPHONE SETTING |
 |
Check the wireless headphone settings.
Check that the volume is not set to "0".
Check that "MUTE" is off.
- OK:
- The volume is not set to "0" and "MUTE" is off.
|
NG |
 |
|
| SET VOLUME TO HIGH AND TURN MUTE OFF |
|
|
| OK |
|
 |
|
| 3. CLEAN INFRARED RAY RECEIVING PORTION |
 |
- Clean the infrared ray receiving portion on the television display assembly.
Check whether the same malfunction occurs.
- OK:
- The function returns to normal.
|
NG |
 |
|
|
|
| OK |
|
 |
|
|
| 4. REPLACE WIRELESS HEADPHONE |
 |
Replace the wireless headphone with a known good or new one and check if the same problem occurs again.
- OK:
- Same problem does not occur.
|
NG |
 |
|
| PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
|
|
|
| OK |
|
 |
|
| END (WIRELESS HEADPHONE WAS DEFECTIVE) |
|