2011-2013 Land Cruiser · Service Manual Audio / Visual / Telematics

PROBLEM SYMPTOMS TABLE

Troubleshooting · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

HINT:
  1. Use the table below to help determine the cause of the problem symptom. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
  2. Inspect the fuses and relays related to this system before inspecting the suspected areas below.

Display 
Symptom
Suspected Area
See page
Black screen
Proceed to "Visual Mute Signal Circuit between Navigation ECU and Television Display"
Click here
Proceed to "Display Signal Circuit between Television Display Assembly and Navigation Receiver Assembly"
Click here
Television display assembly
Click here
Display and Navigation Module Display
Click here
Color on display screen is not usual.
Adjust the settings for contrast, tint, color and brightness
-
Proceed to "Operation Check (Color Bar Check)"
Click here
Television display assembly
Click here
Display and Navigation Module Display
Click here
Only DVD screen is not displayed or not stabilized.
Check and clean disc
Click here
Proceed to "Visual Mute Signal Circuit between Navigation ECU and Television Display"
Click here
Proceed to "DVD Image Signal Circuit between Radio Receiver and Navigation ECU"
Click here
Proceed to "Display Signal Circuit between Television Display Assembly and Navigation Receiver Assembly"
Click here
Television display assembly
Click here
Radio receiver assembly
Click here
Display and navigation module display
Click here
Only display screen of external device does not appear or is not stabilized.
Check if the external device is normal
-
Proceed to "Display Signal Circuit between Navigation ECU and Video Terminal"
Click here
Proceed to "Display Signal Circuit between Television Display Assembly and Navigation Receiver Assembly"
Click here
Headphone terminal (Video terminal)
Click here
Television display assembly
Click here
Display and navigation module display
Click here
Television display does not turn on.
Television display power source circuit
Click here
Proceed to "Television Display does not Turn ON"
Click here
Sound 
Symptom
Suspected Area
See page
Quality of sound from wireless headphone is poor or no sound can be heard.
Proceed to "Sound from Wireless Headphones is Difficult to Hear, cannot be Heard, or Quality is Poor"
Click here
MOST communication line
-
Television display assembly
Click here
Quality of sound from headphone connected to headphone terminal is poor or no sound can be heard.
Proceed to "Sound from Wired Headphones is Difficult to Hear, cannot be Heard, or Quality is Poor"
Click here
Proceed to "Sound Signal Circuit between Headphone Terminal and Television Display"
Click here
MOST communication line
-
Headphone terminal (Video terminal)
Click here
Television display assembly
Click here
Only sound quality input from the external device is poor or no sound can be heard.
Proceed to "Sound Signal Circuit between Multi-Media Interface ECU and Video Terminal"
Click here
Proceed to "Sound Signal Circuit between Navigation ECU and Multi-Media Interface ECU"
Click here
MOST communication line
-
Headphone terminal (Video terminal)
Click here
Multi-media interface ECU
Click here
Display and navigation module display
Click here
Remote Control 
Symptom
Suspected Area
See page
A remote control system does not operate.
Proceed to "A Remote Control System does not Operate"
Click here
Television display assembly
Click here
← OPERATION CHECK (from Jan 2012)PROBLEM SYMPTOMS TABLE (from Jan 2012) →