REMOVAL
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1. REMOVE FRONT BUMPER COVER |
for Standard:
Remove the front bumper cover (Click here).
w/ Winch:
Remove the front bumper cover (Click here).
| 2. REMOVE AMBIENT TEMPERATURE SENSOR |
![]() ![]() |
Disconnect the connector.
Using a screwdriver, detach the clamp and remove the sensor.
- HINT:
- Tape the screwdriver tip before use.


