2011-2013 Land Cruiser · Service Manual Vehicle Exterior

DATA LIST / ACTIVE TEST

System information · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


DATA LIST

HINT:
Using the intelligent tester to read the Data List allows values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Main Body / Data List.

  5. According to the display on the intelligent tester, read the Data List.

    Main Body 
    Tester Display
    Measurement Item/Range
    Normal Condition
    Diagnostic Note
    ACC SW
    Ignition switch/ON (ACC) or OFF
    ON: Ignition switch ACC
    OFF: Ignition switch off
    -
    IG SW
    Ignition switch/ON (IG) or OFF
    ON: Ignition switch ON
    OFF: Ignition switch off
    -
    Stop Light SW
    Stop light switch/ON or OFF
    ON: Brake pedal depressed
    OFF: Brake pedal released
    -
    D Door Courtesy SW
    Front door courtesy light switch LH signal/ON or OFF
    ON: Front door courtesy light switch LH on
    OFF: Front door courtesy light switch LH off
    -
    P Door Courtesy SW
    Front door courtesy light switch RH signal/ON or OFF
    ON: Front door courtesy light switch RH on
    OFF: Front door courtesy light switch RH off
    -
    RR Door Courtesy SW
    Rear door courtesy light switch RH signal/ON or OFF
    ON: Rear door courtesy light switch RH on
    OFF: Rear door courtesy light switch RH off
    -
    RL Door Courtesy SW
    Rear door courtesy light switch LH signal/ON or OFF
    ON: Rear door courtesy light switch LH on
    OFF: Rear door courtesy light switch LH off
    -
    Back Door Courtesy SW
    Back door courtesy light switch signal/ON or OFF
    ON: Back door courtesy light switch on
    OFF: Back door courtesy light switch off
    -
    Dimmer SW
    Dimmer switch signal/ON or OFF
    ON: Dimmer switch on
    OFF: Dimmer switch off
    -
    Passing Light SW
    Passing light switch signal/ON or OFF
    ON: Passing light switch on
    OFF: Passing light switch off
    -
    Front Fog Light SW
    Front fog light switch signal/ON or OFF
    ON: Front fog light switch on
    OFF: Front fog light switch off
    -
    Auto Light SW
    Auto light switch signal/ON or OFF
    ON: Auto light switch on
    OFF: Auto light switch off
    -
    Head Light SW (Head)
    Headlight switch signal/ON or OFF
    ON: Headlight switch (Head) on
    OFF: Headlight switch (Head) off
    -
    Head Light SW (Tail)
    Taillight switch signal/ON or OFF
    ON: Headlight switch (Tail) on
    OFF: Headlight switch (Tail) on
    -
    Illumination Rate lnfo
    Illumination rate/min.: 0, max.: 99.99
    Actual illumination rate displayed
    -
    I/L ON W/Door Key Unlock
    Interior light ON with unlock/ON or OFF
    Customize setting displayed.
    -
    Lighting Time
    Lighting Time/7.5s or 15s or 30s
    Customize setting displayed.
    -
    I/L when ACC OFF
    I/L ON/ACC OFF Light the I/L when ACC OFF/ON or OFF
    Customize setting displayed.
    -
    Light Control
    Light control/ON or OFF
    ON: Light control system on
    OFF: Light control system off
    -
    Sensitivity
    Turn on luminous intensity/DARK1, DARK2, NORMAL, LIGHT1, LIGHT2
    Customize setting displayed.
    -
    Disp Ex ON Sen
    Display extinction luminous intensity/DARK1, DARK2, NORMAL, LIGHT1, LIGHT2
    Customize setting displayed.
    -
    Disp Ex OFF Sen
    Display extinction release luminous intensity/DARK1, DARK2, NORMAL, LIGHT1, LIGHT2
    Customize setting displayed.
    -
    Light Auto OFF Delay
    Light auto OFF delay/OFF, 30 s, 60 s, 90 s
    Customize setting displayed.
    -


ACTIVE TEST

HINT:
Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the Ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Main Body / Active Test.

  5. According to the display on the intelligent tester, perform the Active Test.

    Main Body 
    Tester Display
    Test Part
    Control Range
    Diagnostic Note
    Hazard
    Hazard warning signal
    ON or OFF
    -
    Illuminated Entry System
    Illumination light
    ON or OFF
    -
    Indicator for Lighting
    Illumination of switch indicator operation
    ON or OFF
    -
    Taillight Relay
    Taillight
    ON or OFF
    -
    Headlight Relay
    Headlight
    ON or OFF
    -
    Head Light Hi
    Headlight (Hi)
    ON or OFF
    -
    Front Fog Light Relay
    Front fog light
    ON or OFF
    -
    Rear Fog Light Relay
    Rear fog light
    ON or OFF
    -
    Dimmer Signal
    Illumination dimming operation
    ON or OFF
    -

← FAIL-SAFE CHART (from Jan 2012)DATA LIST / ACTIVE TEST (from Jan 2012) →