2011-2013 Land Cruiser · Service Manual Vehicle Interior

INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT FRONT POWER SEAT SWITCH LH

B165792E05
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Slide Switch:
    Tester Connection
    Switch Condition
    Specified Condition
    9 (SLD+) - 1 (+B)
    Front
    Below 1 Ω
    6 (SLD-) - 4 (GND)
    9 (SLD+) - 4 (GND)
    Off
    6 (SLD-) - 4 (GND)
    9 (SLD+) - 4 (GND)
    Rear
    6 (SLD-) - 1 (+B)
    Front Vertical Switch:
    Tester Connection
    Switch Condition
    Specified Condition
    10 (FRV+) - 1 (+B)
    Up
    Below 1 Ω
    5 (FRV-) - 4 (GND)
    10 (FRV+) - 4 (GND)
    Off
    5 (FRV-) - 4 (GND)
    10 (FRV+) - 4 (GND)
    Down
    5 (FRV-) - 1 (+B)
    Lifter Switch:
    Tester Connection
    Switch Condition
    Specified Condition
    7 (LFT+) - 1 (+B)
    Up
    Below 1 Ω
    8 (LFT-) - 4 (GND)
    7 (LFT+) - 4 (GND)
    Off
    8 (LFT-) - 4 (GND)
    7 (LFT+) - 4 (GND)
    Down
    8 (LFT-) - 1 (+B)
    Reclining Switch:
    Tester Connection
    Switch Condition
    Specified Condition
    3 (RCL+) - 1 (+B)
    Front
    Below 1 Ω
    2 (RCL-) - 4 (GND)
    3 (RCL+) - 4 (GND)
    Off
    2 (RCL-) - 4 (GND)
    3 (RCL+) - 4 (GND)
    Rear
    2 (RCL-) - 1 (+B)

    If the result is not as specified, replace the front power seat switch.


INSPECT FRONT POWER SEAT SWITCH RH

B190299E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Slide Switch:
    Tester Connection
    Switch Condition
    Specified Condition
    9 (SLD+) - 1 (+B)
    Front
    Below 1 Ω
    6 (SLD-) - 4 (GND)
    9 (SLD+) - 4 (GND)
    Off
    6 (SLD-) - 4 (GND)
    9 (SLD+) - 4 (GND)
    Rear
    6 (SLD-) - 1 (+B)
    Front Vertical Switch:
    Tester Connection
    Switch Condition
    Specified Condition
    5 (FRV+) - 1 (+B)
    Up
    Below 1 Ω
    10 (FRV-) - 4 (GND)
    5 (FRV+) - 4 (GND)
    Off
    10 (FRV-) - 4 (GND)
    5 (FRV+) - 4 (GND)
    Down
    10 (FRV-) - 1 (+B)
    Lifter Switch:
    Tester Connection
    Switch Condition
    Specified Condition
    8 (LFT+) - 1 (+B)
    Up
    Below 1 Ω
    7 (LFT-) - 4 (GND)
    8 (LFT+) - 4 (GND)
    Off
    7 (LFT-) - 4 (GND)
    8 (LFT+) - 4 (GND)
    Down
    7 (LFT-) - 1 (+B)
    Reclining Switch:
    Tester Connection
    Switch Condition
    Specified Condition
    3 (RCL+) - 1 (+B)
    Front
    Below 1 Ω
    2 (RCL-) - 4 (GND)
    3 (RCL+) - 4 (GND)
    Off
    2 (RCL-) - 4 (GND)
    3 (RCL+) - 4 (GND)
    Rear
    2 (RCL-) - 1 (+B)

    If the result is not as specified, replace the front power seat switch.

← REMOVAL (from Jan 2012)INSTALLATION (Sep 2011 – Dec 2011) →