2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT FUEL SUPPLY PUMP

  1. Inspect the suction control valve.

    1. A181407E01
      Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      20°C (68°F)
      1.9 to 2.3 Ω

      If the result is not as specified, replace the fuel supply pump.


INSPECT FUEL TEMPERATURE SENSOR

A265149E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    20°C (68°F)
    2.32 to 2.59 Ω

    If the result is not as specified, replace the supply pump.

← REMOVAL (from Jan 2012)INSTALLATION (Sep 2011 – Dec 2011) →