INSTALLATION
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1.
INSTALL STUD BOLT |
 |
- Using an E6 "TORX" socket wrench, install the 4 stud bolts to the EGR cooler.
-
Torque:
- 6.0 N*m{
61 kgf*cm
, 53 in.*lbf
}
| 2.
INSTALL NO. 8 WATER BY-PASS HOSE |
 |
- Install the 2 hoses.
| 3.
INSTALL NO. 3 WATER BY-PASS PIPE |
 |
- Connect the 2 hoses and install the water by-pass pipe with the bolt.
-
Torque:
- 10 N*m{
102 kgf*cm
, 7 ft.*lbf
}
| 4.
INSTALL NO. 1 AND NO. 2 EGR VALVE ASSEMBLIES |
 |
Install the No. 1 and No. 2 EGR valve assemblies (Click here).