REMOVAL
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1.
REMOVE NO. 1 AND NO. 2 EGR VALVE ASSEMBLIES |
 |
Remove the No. 1 and No. 2 EGR valve assemblies (Click here).
| 2.
REMOVE NO. 3 WATER BY-PASS PIPE |
 |
- Remove the bolt and disconnect the 2 hoses to remove the water by-pass pipe.
| 3.
REMOVE NO. 8 WATER BY-PASS HOSE |
 |
- Remove the 2 hoses.
| 4.
REMOVE STUD BOLT |
 |
- Using an E6 "TORX" socket wrench, remove the 4 stud bolts from the EGR cooler.