INSTALLATION
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1.
INSTALL STARTER ASSEMBLY |
 |
- Install the starter with the 2 bolts.
-
Torque:
- 80 N*m{
816 kgf*cm
, 59 ft.*lbf
}
- Connect the 2 starter hoses.
- Attach the harness clamp and connect the wire harness.
Connectl the starter wire with the nut.
-
Torque:
- 21 N*m{
214 kgf*cm
, 15 ft.*lbf
}
Connect the starter connector.
| 2.
INSTALL FUEL COOLER ASSEMBLY |
 |
Install the fuel cooler assembly (Click here).
| 3.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
 |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).