REMOVAL
Removal / installation · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for RHD and LHD vehicles.
| 1. REMOVE REAR NO. 1 SEAT ASSEMBLY RH |
Remove the rear No. 1 seat assembly (Click here).
| 2. REMOVE REAR NO. 1 SEAT RECLINING COVER LH |
![]() ![]() |
Remove the 2 screws.
Detach the 4 claws and remove the cover.
| 3. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY RH |
![]() ![]() |
Remove the bolt and belt.



