2011-2013 Land Cruiser · Service Manual Vehicle Interior

INSTALLATION

Removal / installation · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


1. INSTALL BACK DOOR LOCK ASSEMBLY

  1. B181330
    Install the door lock with the 3 bolts.

    Torque:
    13 N*m{ 133 kgf*cm , 10 ft.*lbf }

  1. Connect the connector.


2. INSTALL BACK DOOR LOCK COVER

  1. B181331
    Attach the 4 claws to install the cover.


3. INSTALL REAR ASSIST GRIP REINFORCEMENT (for Parallel Seat Type)

  1. B186430
    Attach the 2 claws to install the rear assist grip reinforcement.

  1. Install the 3 bolts.


4. INSTALL BACK DOOR GARNISH

  1. B181329
    Attach the 14 clips to install the back door garnish.


5. INSTALL POWER BACK DOOR MAIN SWITCH (for Parallel Seat Type)

  1. B186429
    Attach the 2 claws to install the power back door main switch.


6. INSTALL NO. 2 BACK DOOR SERVICE HOLE COVER (for Parallel Seat Type)

  1. B186428
    Connect the connector.

  1. Attach the 4 claws to install service hole cover.


7. INSTALL ASSIST GRIP (for Parallel Seat Type)

  1. B188374
    Install the assist grip with the 2 screws.


8. INSTALL BACK DOOR SIDE GARNISH RH

HINT:
Use the same procedures described for the LH side.


9. INSTALL BACK DOOR SIDE GARNISH LH

  1. B181327
    Attach the 3 clips to install the back door side garnish.


10. INSTALL CENTER BACK DOOR GARNISH

  1. B181326
    Attach the 5 clips and 2 claws to install the back door garnish.

← INSPECTION (from Jan 2012)INSTALLATION (from Jan 2012) →