2011-2013 Land Cruiser · Service Manual Vehicle Interior

REMOVAL

Removal / installation · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


1. REMOVE CENTER BACK DOOR GARNISH

  1. B313300
    Detach the 5 clips and 4 claws, and remove the center back door garnish.


2. REMOVE BACK DOOR SIDE GARNISH LH

  1. B313301
    Detach the 3 clips and 2 claws, and remove the back door side garnish LH.


3. REMOVE BACK DOOR SIDE GARNISH RH
  1. w/o Power Back Door:

    HINT:
    Use the same procedure described for the LH side.

  1. B313302
    w/ Power Back Door:

    1. Detach the clip and 4 claws, and remove the back door side garnish RH.


4. REMOVE ASSIST GRIP (for Face to Face Seat Type)

  1. B188374
    Remove the 2 screws and assist grip.


5. REMOVE NO. 2 BACK DOOR SERVICE HOLE COVER (for Face to Face Seat Type)

  1. B186428
    Using a screwdriver, detach the 4 claws and remove the No. 2 back door service hole cover.

  1. Disconnect connector.


6. REMOVE DOOR OPENING SWITCH SUB-ASSEMBLY (for Face to Face Seat Type)

  1. B186429
    Detach the 2 claws and remove the door opening switch sub-assembly.


7. REMOVE BACK DOOR GARNISH

  1. B181329
    Using a screwdriver, detach the 14 clips and remove the back door garnish.

    HINT:
    Tape the screwdriver tip before use.


8. REMOVE REAR ASSIST GRIP REINFORCEMENT (for Face to Face Seat Type)

  1. B186430
    Remove the 3 bolts.

  1. Detach the 2 claws and remove the rear assist grip reinforcement.


9. REMOVE BACK DOOR LOCK COVER

  1. B300746
    Detach the 4 claws and remove the back door lock cover.


10. REMOVE BACK DOOR LOCK ASSEMBLY

  1. B181330
    w/o Power Back Door:

    1. Disconnect the connector.

    2. Remove the 3 bolts and back door lock assembly.

  1. B300764
    w/ Power Back Door:

    1. Disconnect the connector.

    2. Detach the guide.

    3. Remove the 4 bolts and back door lock assembly.


11. REMOVE BACK DOOR LOCK PROTECTOR (w/ Power Back Door)

  1. B300763E01
    Remove the screw.

  1. Detach the 7 claws, and remove the protector (B).

    Text in Illustration 
    *1
    Protector (B)

  1. B300762E01
    Detach the 2 claws, and remove the protector (A).
    Text in Illustration 
    *1
    Protector (A)

← REMOVAL (Sep 2011 – Dec 2011)INSPECTION (Sep 2011 – Dec 2011) →