2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

INSPECTION

Inspection · Vehicles built from Jan 2012


INSPECT ENGINE OIL LEVEL SENSOR

  1. A170614E02
    Partially immerse the engine oil level sensor in an oil bath and warm up the oil bath.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    ON, 20°C (68°F)
    Below 1 Ω
    OFF, 20°C (68°F)
    ON, 60°C (140°F)
    OFF, 60°C (140°F)
    10 kΩ or higher

    If the result is not as specified, replace the engine oil level sensor.

← REMOVAL (from Jan 2012)INSTALLATION (from Jan 2012) →