2011-2013 Land Cruiser · Service Manual Audio / Visual / Telematics

INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT NO. 1 ULTRASONIC SENSOR

  1. E221362E01
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 (BI) - 5 (EI)
    Always
    10 kΩ or higher
    1 (BI) - 2 (BO)
    Always
    10 kΩ or higher
    3 (SI) - 4 (SO)
    Always
    10 kΩ or higher
    5 (EI) - 6 (EO)
    Always
    10 kΩ or higher

    If the result is not as specified, replace the sensor.
    Test in Illustration 
    *a
    Component without harness connected
    (No. 1 Ultrasonic Sensor)

← REMOVAL (from Jan 2012)INSTALLATION (Sep 2011 – Dec 2011) →