2011-2013 Land Cruiser · Service Manual Audio / Visual / Telematics

REMOVAL

Removal / installation · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


1. REMOVE FRONT BUMPER COVER
(Click here)

2. REMOVE NO. 4 ENGINE ROOM WIRE

  1. w/o TOYOTA Parking Assist-sensor System, w/ Fog Light:
    Remove the No. 4 engine room wire.

    1. Disconnect the 2 connectors.

    2. Detach the 11 clamps and remove the No. 4 engine room wire.

      B302195

  1. w/ TOYOTA Parking Assist-sensor System, w/ Fog Light:
    Remove the No. 4 engine room wire.

    1. Disconnect the 4 connectors.

    2. Detach the 12 clamps and remove the No. 4 engine room wire.

      B302156

  1. w/ TOYOTA Parking Assist-sensor System, w/o Fog Light:
    Remove the No. 4 engine room wire.

    1. Disconnect the 2 connectors.

    2. Detach the 12 clamps and remove the No. 4 engine room wire.

      B302210


3. REMOVE ULTRASONIC SENSOR CLIP

  1. E244157
    Detach the 4 claws and remove the ultrasonic sensor clip.


4. REMOVE NO. 1 ULTRASONIC SENSOR

HINT:
Use the same procedure to remove the No. 1 ultrasonic sensor on the other side.

  1. E244158
    While pushing down on the lever with a finger to release the one claw, detach the claw on the other side to remove the No. 1 ultrasonic sensor.

    HINT:
    The type of claw on the top and bottom of the sensor are different. Observe the claws carefully before removing the No. 1 ultrasonic sensor.


5. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER

HINT:
Use the same procedure to remove the No. 2 ultrasonic sensor retainer on the other side.

  1. E244159
    Detach the 2 claws and remove the No. 2 ultrasonic sensor retainer from the front bumper cover.

← REMOVAL (Sep 2011 – Dec 2011)INSPECTION (from Sep 2011) →