2011-2013 Land Cruiser · Service Manual Steering

INSTALLATION

Removal / installation · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU

C172655
  1. Install the ECU with the 2 screws.

    Torque:
    1.5 N*m{ 15 kgf*cm , 13 in.*lbf }

  1. Connect the 2 connectors.

    NOTICE:
    The connectors on both ends of the wire harness between the telescopic motor and ECU are the same shape. When installing them, connect the connectors of the same color.


2. INSTALL STEERING LOCK ACTUATOR ASSEMBLY

C147319
  1. Temporarily install the steering lock actuator assembly with 2 new tapered-head bolts.

  1. Tighten the 2 tapered-head bolts until the bolt heads break off.


3. INSTALL STEERING COLUMN ASSEMBLY (TILT STEERING GEAR ASSEMBLY WITH MOTOR)

HINT:
Refer to the instructions for installation of the steering column assembly (Click here).

← INSTALLATION (Sep 2011 – Dec 2011)COMPONENTS (from Jan 2012) →