INSTALLATION
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU |
![]() ![]() |
Install the ECU with the 2 screws.
- Torque:
- 1.5 N*m{ 15 kgf*cm , 13 in.*lbf }
Connect the 2 connectors.
- NOTICE:
- The connectors on both ends of the wire harness between the telescopic motor and ECU are the same shape. When installing them, connect the connectors of the same color.
| 2. INSTALL STEERING LOCK ACTUATOR ASSEMBLY |
![]() ![]() |
Temporarily install the steering lock actuator assembly with 2 new tapered-head bolts.
Tighten the 2 tapered-head bolts until the bolt heads break off.
| 3. INSTALL STEERING COLUMN ASSEMBLY (TILT STEERING GEAR ASSEMBLY WITH MOTOR) |
- HINT:
- Refer to the instructions for installation of the steering column assembly (Click here).



