REMOVAL
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1. REMOVE STEERING COLUMN ASSEMBLY (TILT STEERING GEAR ASSEMBLY WITH MOTOR) |
| 2. REMOVE STEERING LOCK ACTUATOR ASSEMBLY |
Using a center punch, mark the center of the 2 tapered-head bolts.
Using a 3 to 4 mm (0.118 to 0.157 in.) drill, drill a hole in the 2 bolts.
Using a screw extractor, remove the 2 bolts and the steering lock actuator assembly from the steering column assembly.

| 3. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU |
![]() ![]() |
Disconnect the 2 connectors.
Remove the 2 screws and ECU.

