2011-2013 Land Cruiser · Service Manual Steering

REMOVAL

Removal / installation · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


1. REMOVE STEERING COLUMN ASSEMBLY (TILT STEERING GEAR ASSEMBLY WITH MOTOR)
(Click here)

2. REMOVE STEERING LOCK ACTUATOR ASSEMBLY
  1. Using a center punch, mark the center of the 2 tapered-head bolts.

  1. Using a 3 to 4 mm (0.118 to 0.157 in.) drill, drill a hole in the 2 bolts.

  1. C105551E03
    Using a screw extractor, remove the 2 bolts and the steering lock actuator assembly from the steering column assembly.


3. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU

C172655
  1. Disconnect the 2 connectors.

  1. Remove the 2 screws and ECU.

← REMOVAL (Sep 2011 – Dec 2011)INSTALLATION (Sep 2011 – Dec 2011) →