2011-2013 Land Cruiser · Service Manual Steering

DISASSEMBLY

Removal / installation · Vehicles built from Sep 2011


1. FIX POWER STEERING LINK ASSEMBLY

C172441E01
  1. Using SST, fix the power steering link in a vise.

    SST
    09612-00012  

    HINT:
    Tape SST before use.

    NOTICE:
    When using a vise, do not overtighten it.


2. REMOVE STEERING RACK BOOT CLIP LH
  1. Using pliers, remove the steering rack boot clip.


3. REMOVE STEERING RACK BOOT CLIP RH

HINT:
Use the same procedures described for the LH side.


4. REMOVE STEERING RACK BOOT CLAMP LH

C172443
  1. Using pliers, remove the boot clamp as shown in the illustration.

    NOTICE:
    Be careful not to damage the steering rack boot.


5. REMOVE STEERING RACK BOOT CLAMP RH

HINT:
Use the same procedures described for the LH side.


6. REMOVE NO. 1 STEERING RACK BOOT
  1. Remove the steering rack boot LH and RH.


7. REMOVE STEERING RACK END SUB-ASSEMBLY

  1. C172487E01
    Using a wrench, hold the steering rack (LH side).

  1. Using SST, remove the steering rack end (LH side) from the power steering rack.

    SST
    09922-10010  

    HINT:
    Rotate SST in the direction shown in the illustration.

  1. Using SST, remove the steering rack end (RH side) from the power steering rack.

    SST
    09922-10010  

    HINT:
    Rotate SST in the direction show in the illustration.

    NOTICE:
    1. Do not mistake the direction of SST.
    2. Make sure to keep the power steering rack fixed in place with SST.

← REMOVAL (from Jan 2012)INSPECTION (from Sep 2011) →