2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

REMOVAL

Removal / installation · Vehicles built from Jan 2012


1. REMOVE FUEL TANK SUB-ASSEMBLY
(Click here)

2. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY

  1. A242908E01
    Set SST on the fuel pump gauge retainer.
    SST
    09808-14030  

    HINT:
    1. Engage the claws of SST securely with the fuel pump gauge retainer holes to secure SST.
    2. Install SST while pressing the claws of SST against the fuel pump gauge retainer (towards the center of SST).

  1. A242907E01
    Using SST, loosen the retainer.
    SST
    09808-14030  
    Text in Illustration 
    V100135
    Turn

    NOTICE:
    1. When the retainer is loosened, be careful as the pump and gauge tube will spring upward from the force of the spring.
    2. Remove foreign matter around the fuel suction with pump and gauge before this operation.

    HINT:
    Fit the tips of SST onto the ribs of the retainer.

  1. Remove the retainer.

  1. Remove the fuel suction with pump and gauge tube assembly from the fuel tank.

    NOTICE:
    Be careful not to bend the arm of the fuel sender gauge.

  1. Remove the gasket from the fuel tank.

← COMPONENTS (from Jan 2012)DISASSEMBLY (from Jan 2012) →