2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

INSTALLATION

Removal / installation · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


1. INSTALL INJECTOR DRIVER

NOTICE:
Be careful not to drop or strike the injector driver.

  1. A174983
    Install the No. 2 injector driver and injector driver bracket to the No. 2 injector driver bracket with the 4 screws.

    Torque:
    2.0 N*m{ 20 kgf*cm , 18 in.*lbf }

  1. A174982
    Install the No. 1 injector driver and injector driver bracket to the No. 1 injector driver bracket with the 4 screws.

    Torque:
    2.0 N*m{ 20 kgf*cm , 18 in.*lbf }

  1. A174981E01
    Install the No. 2 injector driver bracket to the No. 1 injector driver bracket with the 2 bolts.

    Torque:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf }

  1. A175106
    Install the injector driver assembly with the 3 bolts.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. Attach the fuel hose clamp and wire harness clamp.

  1. A175105
    Connect the 4 injector driver connectors.


2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  1. Connect the cables to the negative (-) main battery and sub-battery terminals.

← REMOVAL (from Jan 2012)INSTALLATION (from Jan 2012) →