DTC Code
|
Detection Condition
|
Trouble Area
|
U0100
|
While driving at 30 km/h (19 mph), CAN communication between the suspension control ECU and ECM stops for 3 seconds or more.
|
- CAN communication system
- ECM
- Suspension control ECU
|
U0101
|
While driving at 30 km/h (19 mph), CAN communication between the suspension control ECU and ECM stops for 3 seconds or more.
|
- CAN communication system
- ECM
- Suspension control ECU
|
U0114
|
While driving at 30 km/h (19 mph), CAN communication between the suspension control ECU and four wheel drive control ECU stops for 3 seconds or more.
|
- CAN communication system
- Four wheel drive control ECU
- Suspension control ECU
|
U0122
|
CAN communication between the suspension control ECU and skid control ECU stops for 3 seconds or more.
|
- CAN communication system
- Skid control ECU
- Suspension control ECU
|
U0124
|
CAN communication between the suspension control ECU and yaw rate sensor stops for 3 seconds or more.
|
- CAN communication system
- Yaw rate sensor
- Suspension control ECU
|
U0126
|
CAN communication between the suspension control ECU and steering sensor stops for 3 seconds or more.
|
- CAN communication system
- Steering sensor
- Suspension control ECU
|
U0130
|
5 seconds after the engine switch is turned on (IG), CAN communication between the suspension control ECU and steering control ECU stops for 3 seconds or more.
|
- CAN communication system
- Steering control ECU
- Suspension control ECU
|
U0140
|
CAN communication between the suspension control ECU and main body ECU stops for 5 seconds or more.
|
- CAN communication system
- Main body ECU
- Suspension control ECU
|