INSPECTION
Inspection · Vehicles built from Sep 2011
| INSPECT FRONT ENGINE MOUNTING INSULATOR |
Visually check the front engine mounting insulator for leaks.

If the fluid leaks, replace the front engine mounting insulator.
| INSPECT FRONT ENGINE MOUNTING INSULATOR |
Connect a vacuum pump to the engine mount insulator.

Using the vacuum pump, apply a vacuum of 80 kPa (600 mmHg. 25 in.Hg) and wait for 1 minute.
Check that there is no change in the needle movement of the vacuum pump gauge.
If the result is not as specified, replace the front engine mounting insulator.
