REMOVAL
Removal / installation · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
- NOTICE:
- When replacing an injector (including interchanging injectors between cylinders) or common rail, replace the corresponding injection pipes with new ones.
- w/DPF
When fuel lines are disconnected, air may enter the fuel lines, leading to engine starting trouble. Therefore, perform forced regeneration and bleed the air from the fuel lines.
- When replacing an injector (including interchanging injectors between cylinders) or common rail, replace the corresponding injection pipes with new ones.
| 1. REMOVE ENGINE ASSEMBLY |
Remove the engine assembly (Click here).
| 2. REMOVE FRONT ENGINE MOUNTING INSULATOR LH |
Remove the nut and mounting insulator.

| 3. REMOVE FRONT ENGINE MOUNTING INSULATOR RH |
![]() ![]() |
Disconnect the vacuum hose.
Remove the nut and mounting insulator.

