INSTALLATION
Removal / installation · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1.
INSTALL NO. 1 RADIO RECEIVER BRACKET |
 |
Install the No.1 radio receiver bracket with the 4 bolts.
-
Torque:
- 3.0 N*m{
30 kgf*cm
, 26 in.*lbf
}
| 2.
INSTALL MULTI-DISPLAY ASSEMBLY |
 |
Connect the connectors.
- Insert the multi-display assembly and attach the 2 clips and 6 claws on its backside.
- NOTICE:
- When inserting the multi-display assembly, do not press the knobs on it.
- Install the multi-display assembly with the 2 screws and 2 bolts.
-
Torque:
- Bolt A:
- 12 N*m{
122 kgf*cm
, 9 ft.*lbf
}
| 3.
INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY
|
 |
Connect the connector.
Attach the 6 claws to install the No. 4 instrument panel register.
| 4.
INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
|
 |
Connect the connector.
Attach the 6 claws to install the No. 3 instrument panel register.
| 5.
INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY
|
 |
Attach the 8 claws to install the opening cover.
| 6.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
 |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).