2011-2013 Land Cruiser · Service Manual Vehicle Exterior

INSTALLATION

Removal / installation · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. INSTALL HEADLIGHT ASSEMBLY LH
  1. Connect the connectors.

  1. Install the headlight assembly LH with the 4 bolts.


2. INSTALL FRONT FENDER MAIN SEAL LH

  1. B181061
    Attach the 3 clips to install the fender main seal.


3. INSTALL FRONT BUMPER COVER
(Click here)

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


5. ADJUST HEADLIGHT AIMING
(Click here)

6. ADJUST FOG LIGHT AIMING
(Click here)
← INSTALLATION (Sep 2011 – Dec 2011)REPAIR (Sep 2011 – Dec 2011) →