2011-2013 Land Cruiser · Service Manual Steering

INSPECTION

Inspection · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

CAUTION:
The vehicle is equipped with an SRS (Supplemental Restraint System) which includes components such as airbags. Before servicing (including removal or installation of parts), be sure to read the PRECAUTION in the SRS (Click here).


INSPECT STEERING PAD SWITCH ASSEMBLY (w/ DISP Switch)

  1. Disconnect the z36 switch connector.

    E158678E02

    Text in Illustration 
    *1
    DISP Switch
    -
    -
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    2 (-DP) - 7 (+DP)
    DISP switch pushed
    Below 2.5 Ω

    If the result is not as specified, replace the steering switch assembly.


INSPECT STEERING PAD SWITCH ASSEMBLY (w/ AUDIO + TEL + VOICE + DISP Switch)

  1. Disconnect the z36 switch connector.

    E155690E11

    Text in Illustration 
    *1
    Volume+ Switch
    *2
    Volume- Switch
    *3
    Seek+ Switch
    *4
    Seek- Switch
    *5
    MODE Switch
    *6
    Off Hook Switch
    *7
    On Hook Switch
    *8
    Voice Switch
    *9
    DISP Switch
    -
    -
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    10 (AU1) - 8 (EAU)
    No switch is pushed
    100 kΩ
    Seek+ switch pushed
    Below 2.5 Ω
    Seek- switch pushed
    329 Ω
    Volume+ switch pushed
    1000 Ω
    Volume- switch pushed
    3110 Ω
    9 (AU2) - 8 (EAU)
    No switch is pushed
    100 kΩ
    MODE switch pushed
    Below 2.5 Ω
    ON Hook switch pushed
    329 Ω
    OFF Hook switch pushed
    1000 Ω
    Voice switch pushed
    3110 Ω
    2 (+DP) - 8 (EAU)
    DISP switch pushed
    Below 2.5 Ω

    If the result is not as specified, replace the steering switch assembly.


INSPECT STEERING PAD SWITCH ASSEMBLY (w/ AUDIO + DISP Switch)

  1. Disconnect the z36 switch connector.

    E155692E04

    Text in Illustration 
    *1
    Volume+ Switch
    *2
    Volume- Switch
    *3
    Seek+ Switch
    *4
    Seek- Switch
    *5
    MODE Switch
    *6
    DISP Switch
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    10 (AU1) - 8 (EAU)
    No switch is pushed
    100 kΩ
    Seek+ switch pushed
    Below 2.5 Ω
    Seek- switch pushed
    329 Ω
    Volume+ switch pushed
    1000 Ω
    Volume- switch pushed
    3110 Ω
    9 (AU2) - 8 (EAU)
    No switch is pushed
    100 kΩ
    MODE switch pushed
    Below 2.5 Ω
    2 (-DP) - 7 (+DP)
    DISP switch pushed
    Below 2.5 Ω

    If the result is not as specified, replace the steering pad switch assembly.


INSPECT STEERING PAD SWITCH ASSEMBLY (w/ AUDIO + TEL + VOICE + DISP + Distance Control Switch)

  1. Disconnect the z36 switch connector.

    E158677E01

    Text in Illustration 
    *1
    Volume+ Switch
    *2
    Volume- Switch
    *3
    Seek+ Switch
    *4
    Seek- Switch
    *5
    MODE Switch
    *6
    Off Hook Switch
    *7
    On Hook Switch
    *8
    Voice Switch
    *9
    DISP Switch
    *10
    Distance Control Switch
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    10 (AU1) - 8 (EAU)
    No switch is pushed
    100 kΩ
    Seek+ switch pushed
    Below 2.5 Ω
    Seek- switch pushed
    329 Ω
    Volume+ switch pushed
    1000 Ω
    Volume- switch pushed
    3110 Ω
    9 (AU2) - 8 (EAU)
    No switch is pushed
    100 kΩ
    MODE switch pushed
    Below 2.5 Ω
    ON Hook switch pushed
    329 Ω
    OFF Hook switch pushed
    1000 Ω
    Voice switch pushed
    3110 Ω
    7 (+DP) - 8 (EAU)
    DISP switch pushed
    Below 2.5 Ω
    4 (DIST) - 6 (ECC)
    Distance Control Switch pushed
    Below 2.5 Ω

    If the result is not as specified, replace the steering switch assembly.


INSPECT STEERING PAD SWITCH ASSEMBLY (w/ AUDIO Switch)

  1. Disconnect the z36 switch connector.

    C226741E01

    Text in Illustration 
    *1
    Volume+ Switch
    *2
    Volume- Switch
    *3
    Seek+ Switch
    *4
    Seek- Switch
    *5
    MODE Switch
    -
    -
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    10 (AU1) - 8 (EAU)
    No switch is pushed
    100 kΩ
    Seek+ switch pushed
    Below 2.5 Ω
    Seek- switch pushed
    329 Ω
    Volume+ switch pushed
    1000 Ω
    Volume- switch pushed
    3110 Ω
    9 (AU2) - 8 (EAU)
    No switch is pushed
    100 kΩ
    MODE switch pushed
    Below 2.5 Ω

    If the result is not as specified, replace the steering switch assembly.

← INSPECTION (Sep 2011 – Dec 2011)INSTALLATION (Sep 2011 – Dec 2011) →