2011-2013 Land Cruiser · Service Manual Audio / Visual / Telematics

REMOVAL

Removal / installation · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY

B183763
  1. Detach the 8 claws and remove the opening cover.


4. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

B180307E02
  1. Place protective tape as shown in the illustration.

    Text in Illustration 
    *1
    Protective Tape

  1. Using a moulding remover, detach the 6 claws.

  1. Disconnect the connector and remove the No. 3 instrument panel register.


5. REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

B181944E02
  1. Place protective tape as shown in the illustration.

    Text in Illustration 
    *1
    Protective Tape

  1. Using a moulding remover, detach the 6 claws.

  1. Disconnect the connector and remove the No. 4 instrument panel register.


6. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL CENTER

  1. B181491
    Detach the 10 claws on the backside of the cluster finish panel to remove it.


7. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET

  1. B181490
    Remove the 2 screws and 2 bolts.

  1. Disconnect the connectors and remove the radio receiver.


8. REMOVE NO. 1 RADIO BRACKET

  1. B181492
    Remove the 3 bolts and bracket.


9. REMOVE NO. 2 RADIO BRACKET

  1. B181493
    Remove the 3 bolts and bracket.


10. REMOVE CLOCK ASSEMBLY

  1. B179753
    Remove the 2 screws and clock.


11. REMOVE HAZARD WARNING SIGNAL SWITCH ASSEMBLY

  1. E155869
    Detach the 2 claws and remove the hazard warning switch.

← REMOVAL (Sep 2011 – Dec 2011)INSTALLATION (Sep 2011 – Dec 2011) →