B1455/55 Driver Side Air Outlet Damper FOOT/DEF Control Servo Motor Circuit
Diagnostic trouble codes · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
DESCRIPTION
Air outlet damper servo motor (for DEF mode) sends pulse signals to inform the air conditioning amplifier assembly of the damper position. The air conditioning amplifier assembly activates the motor (normal or reverse) based on the signals to move the air outlet damper (for DEF mode) to any position, which controls the air outlet changes.- HINT:
- Confirm that no mechanical problem is present because this trouble code can be output when either a damper link or damper is mechanically locked.
| DTC Code |
DTC Detection Condition |
Trouble Area |
| B1455/55 |
The air outlet damper position does not change even if the air conditioning amplifier assembly operates the air outlet damper servo motor (for DEF mode) |
|
WIRING DIAGRAM


INSPECTION PROCEDURE
| 1. READ VALUE USING INTELLIGENT TESTER (AIR OUTLET DAMPER SERVO MOTOR) |
Use the Data List to check if the servo motor is functioning properly.
Air Conditioner Tester Display
Measurement Item/Range
Normal Condition
Diagnostic Note
A/O Damper FOOT/DEF Pos(P)
Air outlet damper servo motor (for DEF mode) target pulse /
Min.: 6, Max.: 117
- FACE1: 117 (pulse)
- FACE2: 109 (pulse)
- B/L1: 93 (pulse)
- B/L2: 81 (pulse)
- FOOT-D: 52 (pulse)
- FOOT-R: 41 (pulse)
- FOOT-F: 41 (pulse)
- F/D: 18 (pulse)
- DEF: 6 (pulse)
-
- OK:
- The display is as specified in the normal condition.
- FACE1: 117 (pulse)
|
|
||||
| OK | ||
| ||
| 2. CHECK AIR OUTLET DAMPER SERVO MOTOR (OPERATION) |
Replace the air outlet servo motor (for DEF mode) (Click here).
- HINT:
- Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a normal one.
| NEXT | |
| 3. CHECK FOR DTC |
Clear the DTCs (Click here).
Check for DTCs (Click here).
- OK:
- DTC B1456 is not output.
|
|
||||
| OK | ||
| ||
