2011-2013 Land Cruiser · Service Manual Vehicle Exterior

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from Jan 2012


CHECK DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Body No. 4 / DTC.

  5. Read the DTCs.


CLEAR DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Body No. 4 / DTC.

  5. Clear the DTCs.

← TERMINALS OF ECU (from Jan 2012)DATA LIST / ACTIVE TEST (from Jan 2012) →