2011-2013 Land Cruiser · Service Manual Vehicle Exterior

INSPECTION

Inspection · Vehicles built from Jan 2012


INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH

  1. E127507E16
    Apply battery voltage to the connector and check the LED illumination condition.

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → 1
    Battery negative (-) → 2
    LED illuminates

    If the result is not as specified, replace the side turn signal light assembly LH.
    Text in Illustration 
    *a
    Component without harness connected
    (Side Turn Signal Light Assembly LH)


INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH

  1. E127507E16
    Apply battery voltage to the connector and check the LED illumination condition.

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → 1
    Battery negative (-) → 2
    LED illuminates

    If the result is not as specified, replace the side turn signal light assembly RH.
    Text in Illustration 
    *a
    Component without harness connected
    (Side Turn Signal Light Assembly RH)

← REMOVAL (from Jan 2012)INSTALLATION (from Jan 2012) →