U0073 Control Module Communication Bus Off
Diagnostic trouble codes · Vehicles built Sep 2011 – Dec 2011
Also covers:
- U0100 Lost Communication with ECM
- U0126 Lost Communication with Steering Angle Sensor Module
- U0129 Lost Communication with Brake System Control Module
- U0130 Lost Communication with VGRS
- U0140 Lost Communication with Main Body ECU
- U1110 Lost Communication with Clearance Warning ECU
DESCRIPTION
These DTCs are stored if there is a malfunction in the CAN communication system connected to the parking assist ECU.- HINT:
- If CAN communication system DTCs are stored, they may also be stored in other systems.
| DTC No. |
DTC Detection Condition |
Trouble Area |
| U0073 |
Control module communication bus off |
CAN communication system |
| U0100 |
Lost communication with ECM |
|
| U0126 |
Lost communication with steering angle sensor |
|
| U0129 |
Lost communication with brake system |
|
| U0130 |
Lost communication with VGRS |
|
| U0140 |
Lost communication with main body ECU |
|
| U1100 |
Lost communication with clearance warning ECU |
INSPECTION PROCEDURE
| 1. CHECK DTC OUTPUT |
Clear the DTCs (Click here).
Check for DTCs (Click here).
Result Result
Proceed to
No DTC is output
A
DTC is output (for LHD)
B
DTC is output (for RHD)
C
- HINT:
- If CAN communication system DTCs are stored, they may also be stored in other systems.
- If the CAN communication system has been inspected and repaired in other systems, the DTCs will not be output when rechecking for DTCs.
- If these DTCs are output frequently, duplicate the conditions that cause the problem symptoms and perform the inspection again, even though the DTC was not output when rechecking for DTCs (Click here).
- If CAN communication system DTCs are stored, they may also be stored in other systems.
|
|
||||
|
|
||||
| A | ||
| ||
