2011-2013 Land Cruiser · Service Manual Audio / Visual / Telematics

U0073 Control Module Communication Bus Off

Diagnostic trouble codes · Vehicles built Sep 2011 – Dec 2011

Also covers:

DESCRIPTION

This DTC is stored when a CAN communication circuit malfunction is detected by the display and navigation module display self check.
DTC No.
DTC Detection Condition
Trouble Area
U0073
CAN connection malfunction
CAN communication system
U0155
No communication with combination meter assembly
  1. Combination meter assembly
  2. CAN communication system
U0164
No communication with A/C amplifier
  1. Air conditioning amplifier assembly
  2. CAN communication system
U1110
No communication with clearance warning ECU
  1. Clearance warning ECU assembly
  2. CAN communication system

INSPECTION PROCEDURE


1. CHECK DTC
  1. Clear the DTCs (Click here).

  1. Recheck for DTCs and check if the same trouble occurs again.

    OK:
    No DTCs are output.

    Result 
    Result
    Proceed to
    OK
    A
    NG (for LHD)
    B
    NG (for RHD)
    C



B
GO TO CAN COMMUNICATION SYSTEM (Click here)

C
GO TO CAN COMMUNICATION SYSTEM (Click here)
A

USE SIMULATION METHOD TO CHECK (Click here)


← B15F7 Certification ECU Vehicle Information Reading/Writing Process Malfunction (Sep 2011 – Dec 2011)Illumination for Panel Switch does not Come on with Tail Switch ON (Sep 2011 – Dec 2011) →