2011-2013 Land Cruiser · Service Manual Vehicle Exterior

DISASSEMBLY

Removal / installation · Vehicles built from Sep 2011


1. REMOVE SYMBOL EMBLEM

HINT:
When removing the symbol emblem, heat the vehicle body and symbol emblem using a heat light.

Standard:
Item
Temperature
Vehicle Body
40 to 60°C (104 to 140°F)
Symbol Emblem
20 to 30°C (68 to 86°F)

NOTICE:
Do not heat the vehicle body or symbol emblem excessively.

  1. B292546E01
    Put protective tape around the symbol emblem.

  1. Insert piano wire between the vehicle body and symbol emblem.

    HINT:
    Be careful of the boss positions.

  1. Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.

  1. Pull the piano wire and scrape off the double-sided tape that holds the symbol emblem to the vehicle body.

    NOTICE:
    Be careful not to damage the vehicle body.

  1. Remove the symbol emblem.

    Text in Illustration 
    *1
    Protective Tape
    *2
    Wooden Block
    *3
    Boss


2. REMOVE BACK DOOR OUTSIDE GARNISH PROTECTOR

  1. B292548
    Remove the back door outside garnish protector.


3. REMOVE BACK DOOR OUTSIDE GARNISH

  1. B292549
    Remove the 3 screws and back door outside garnish from the back door No. 2 outside garnish.


4. REMOVE REAR LICENSE LIGHT COVER

  1. B292550
    Detach the 9 claws and remove the rear license light cover from the back door outside garnish.


5. REMOVE LICENSE PLATE LIGHT ASSEMBLY

  1. E233948
    Remove the 2 screws.

  1. Detach the 2 guides and remove the 2 license plate light assemblies.

← REMOVAL (from Sep 2011)REASSEMBLY (from Sep 2011) →