Home › Engine / Hybrid System › 1UR-FE (ENGINE CONTROL) › ACCELERATOR PEDAL › from 2015.08
RM2660E _51 Engine / Hybrid System _052772 1UR-FE ENGINE CONTROL _0254971 ACCELERATOR PEDAL A

1UR-FE ENGINE CONTROL  ACCELERATOR PEDAL  REMOVAL  


PROCEDURE

Hide 55606 1.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 78110K 2.REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

NOTICE:

This accelerator pedal does not require lubrication.

Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

If applied, the accelerator pedal sensor assembly must be replaced.


a.
A372061E02
0.052,0.083 0.365,0.323 0.313,0.24 10 true *A 0.125,2.438 0.333,2.615 0.208,0.177 10 false *B

Disconnect the accelerator pedal position sensor connector.

Text in Illustration
*A for LHD
*B for RHD


b.

Remove the 2 nuts and accelerator pedal sensor.