Home › Engine / Hybrid System › 1UR-FE (ENGINE CONTROL) › IGNITION COIL AND SPARK PLUG
RM2660E _51 Engine / Hybrid System _052772 1UR-FE ENGINE CONTROL _0254975 IGNITION COIL AND SPARK PLUG A

1UR-FE ENGINE CONTROL  IGNITION COIL AND SPARK PLUG  REMOVAL  


PROCEDURE

Hide 2.REMOVE AIR CLEANER AND HOSE

a.
A456917

Disconnect the No. 2 PCV hose and No. 1 air hose.


b.

Disconnect the mass air flow meter connector and detach the clamp.


c.

Remove the 3 bolts and loosen the hose clamp, and then remove the air cleaner and hose.


Hide 19500 3.REMOVE IGNITION COIL ASSEMBLY

a.

for Bank 1:

i.
A271367

Detach the 4 clamps and disconnect the engine wire.


ii.

Disconnect the 4 ignition coil connectors.


iii.
A271372

Remove the 4 bolts and 4 ignition coils.



b.

for Bank 2:

i.
A271376

Remove the 2 bolts and disconnect the water by-pass pipe.


ii.
A271366

Detach the 3 clamps and disconnect the engine wire.


iii.

Disconnect the 4 ignition coil connectors.


iv.
A271373

Remove the 4 bolts and 4 ignition coils.



Hide 19100P 4.REMOVE SPARK PLUG

a.

Using a 16 mm plug wrench, remove the 8 spark plugs.