Home › Engine / Hybrid System › 1UR-FE (ENGINE MECHANICAL) › DRIVE BELT
RM2660E _51 Engine / Hybrid System _052776 1UR-FE ENGINE MECHANICAL _0255034 DRIVE BELT A

1UR-FE ENGINE MECHANICAL  DRIVE BELT  REMOVAL  


PROCEDURE

Hide 11209 1.REMOVE V-BANK COVER SUB-ASSEMBLY

a.
A274415E01
0.26,2.982 0.440,3.145 0.180,0.163 10 *1 2.986,0.213 3.166,0.376 0.180,0.163 10 *4 2.756,0.845 2.936,1.008 0.180,0.163 10 *3 0.833,2.873 1.013,3.036 0.180,0.163 10 *2 0.348,2.982 0.348,2.895 0.348,2.895 0.389,2.807 false 0.833,2.961 0.673,2.961 false 2.738,0.935 2.679,0.935 2.679,0.935 2.653,0.748 false 2.974,0.307 2.904,0.307 2.904,0.307 2.864,0.452 false

Raise the front of the V-bank cover to detach the 3 pins. Then remove the 2 V-bank cover hooks from the bracket, and remove the V-bank cover.

Text in Illustration
*1 Grommet
*2 Pin
*3 Hook
*4 Bracket


Hide 53806 2.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

Hide 53805 3.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

Hide 51405A 4.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 16361A 5.REMOVE FAN AND GENERATOR V BELT

a.
A163770E11
1.885,1.583 1.198,1.906 1.198,1.906 1.073,1.906 true 1.823,1.979 1.969,2.094 1.969,2.094 2.094,2.094 false 2.135,2.01 2.406,2.167 0.271,0.156 10 true *1 0.906,1.823 1.177,1.979 0.271,0.156 10 false *2 1.969,4.25 2.229,4.469 0.26,0.219 10 true *a

While turning the belt tensioner counterclockwise, align the service hole for the belt tensioner and the belt tensioner fixing position, and then insert a bar with a diameter of 5 mm (0.197 in.) into the service hole to fix the belt tensioner in place.

Text in Illustration
*1 Bar
*2 Service Hole
*a Turn

HINT:

The pulley bolt for the belt tensioner has a left-hand thread.



b.

Remove the fan and generator V belt.