Home › Engine / Hybrid System › 1VD-FTV (ENGINE CONTROL) › ECD SYSTEM (w/o DPF) › from 2015.08
RM2660E _51 Engine / Hybrid System _052773 1VD-FTV ENGINE CONTROL _0254984 ECD SYSTEM(w/o DPF) L

1VD-FTV ENGINE CONTROL  ECD SYSTEM(w/o DPF)  PRECAUTION  


INITIALIZATION AND REGISTRATION


NOTICE:

When replacing the ECM and/or any other components in the following chart, perform the corresponding utility items.


HINT:

When the ECM and one or more other components are replaced at the same time, perform the following utility items by following the instructions shown on the GTS display, starting with the ECM.


Replacement Part Utility Item
ECM
·

Learning Values Save (See page (Click here))

·

Learning Values Write (See page (Click here))

·

Input Injector Compensation Code (See page (Click here))


Engine assembly Input Injector Compensation Code (See page (Click here))
Fuel supply pump assembly Supply Pump Initialization (See page (Click here))
Injector assembly Input Injector Compensation Code (See page (Click here))


FUEL INJECTOR COMPENSATION CODE


a.

Each fuel injector has different fuel injection characteristics. In order to optimize fuel injection performance, the ECM compensates for these differences by adjusting the fuel injection duration of each fuel injector according to its compensation code. Fuel injector compensation codes are unique, 30 digit, alphanumeric values printed on the head portion of each fuel injector.


b.
A141119E09
2.896,1.969 3.135,2.823 3.135,2.823 2.948,2.823 false 0.104,0.073 0.802,0.302 0.698,0.229 10 false Example: 0.844,2.719 2.958,2.938 2.115,0.219 10 false Fuel Injector Compensation Code

When a fuel injector is replaced, the new fuel injector compensation code must be input into the ECM.


c.

When the ECM is changed, all of the existing fuel injector compensation codes must be input into the new ECM.


d.

If an incorrect fuel injector compensation code is input into the ECM, the engine assembly may rattle or engine idling may become rough. In addition, engine failure may occur and the life of the engine may be shortened.



FOR USING GTS


CAUTION:

Observe the following items for safety reasons:

-

Before using the GTS, read its instruction manual.

-

Prevent the EGR cable from being caught on the pedals, shift lever or steering wheel when driving with the EGR connected to the vehicle.

-

When driving the vehicle for testing purposes using the EGR, two persons are required. One person drives the vehicle, and the other operates the EGR.





IGNITION SWITCH EXPRESSION


HINT:

The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.

Expression Ignition Switch (position) Engine Switch (condition)
Ignition Switch off Off Off
Ignition Switch ON ON On (IG)
Ignition Switch ACC ACC On (ACC)
Engine Start START Start