Home › Engine / Hybrid System › 1VD-FTV (ENGINE CONTROL) › MASS AIR FLOW METER (w/o DPF) › from 2015.08
RM2660E _51 Engine / Hybrid System _052773 1VD-FTV ENGINE CONTROL _0254985 MASS AIR FLOW METER(w/o DPF) G

1VD-FTV ENGINE CONTROL  MASS AIR FLOW METER(w/o DPF)  ON-VEHICLE INSPECTION  


CAUTION / NOTICE / HINT

PROCEDURE

Hide 22204 1.CHECK MASS AIR FLOW METER

a.

Check the mass air flow value.

i.

Connect the GTS to the DLC3.


ii.

Turn the engine switch on (IG).


iii.

Turn the GTS on.


iv.

Enter the following menus: Powertrain / Engine / Data List / Primary / MAF.


v.
A123038E01
1.05,1.235 1.252,1.380 0.202,0.144 10 Air

Blow air into the MAF meter, and check that the MAF value fluctuates.

If the result is not as specified, check the MAF meter (See page Engine / Hybrid System>1VD-FTV (ENGINE CONTROL)>MASS AIR FLOW METER (w/o DPF)>INSPECTION), or wiring and ECM (See page Engine / Hybrid System>1VD-FTV (ENGINE CONTROL)>ECD SYSTEM (w/o DPF)>P0102).