Home › Engine / Hybrid System › 1VD-FTV (ENGINE CONTROL) › CAMSHAFT POSITION SENSOR
RM2660E _51 Engine / Hybrid System _052773 1VD-FTV ENGINE CONTROL _0254986 CAMSHAFT POSITION SENSOR A

1VD-FTV ENGINE CONTROL  CAMSHAFT POSITION SENSOR  INSTALLATION  


PROCEDURE

Hide 11301M 1.INSTALL CAMSHAFT POSITION SENSOR

A124879

a.

Apply a light coat of engine oil to the O-ring.

NOTICE:

When reusing the sensor, inspect the O-ring.

If the O-ring has scratches or cuts, replace the sensor.



b.
A163142

Install the sensor with the bolt.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)


c.

Connect the sensor connector.


Hide 12601E 2.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY (w/ Intercooler)