Home › Engine / Hybrid System › 1VD-FTV (ENGINE CONTROL) › ACTIVE CONTROL ENGINE MOUNT
RM2660E _51 Engine / Hybrid System _052773 1VD-FTV ENGINE CONTROL _0254994 ACTIVE CONTROL ENGINE MOUNT A

1VD-FTV ENGINE CONTROL  ACTIVE CONTROL ENGINE MOUNT  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:
·

When replacing an injector (including interchanging injectors between cylinders) or common rail, replace the corresponding injection pipes with new ones.

·

w/DPF

When fuel lines are disconnected, air may enter the fuel lines, leading to engine starting trouble. Therefore, perform forced regeneration and bleed the air from the fuel lines (See page Engine / Hybrid System>1VD-FTV (EMISSION CONTROL)>EMISSION CONTROL SYSTEM>ON-VEHICLE INSPECTION).



PROCEDURE

Hide 12361 1.INSTALL FRONT ENGINE MOUNTING INSULATOR RH

a.
A176553

Install the mounting insulator with the nut.

Torque:
80 N*m (816 kgf*cm, 59 ft.*lbf)


b.

Connect the vacuum hose.


Hide 12362A 2.INSTALL FRONT ENGINE MOUNTING INSULATOR LH

a.
A176552

Install the mounting insulator with the nut.

Torque:
80 N*m (816 kgf*cm, 59 ft.*lbf)


Hide 3.INSTALL ENGINE ASSEMBLY