Home › Engine / Hybrid System › 1VD-FTV (ENGINE CONTROL) › ACCELERATOR PEDAL › 2014.08–2015.08
RM2660E _51 Engine / Hybrid System _052773 1VD-FTV ENGINE CONTROL _0254996 ACCELERATOR PEDAL A

1VD-FTV ENGINE CONTROL  ACCELERATOR PEDAL  REMOVAL  


PROCEDURE

Hide 55606 1.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

Hide 78110K 2.REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

NOTICE:
·

Avoid excessive force to the accelerator pedal sensor.

·

Do not disassemble the accelerator pedal sensor assembly.

·

This accelerator pedal does not requite lubrication.

Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

If applied, the accelerator pedal sensor assembly must be replaced.



a.
A183103E05
0.063,0.094 0.698,0.365 0.635,0.271 10 true for LHD: 0.115,2.417 0.781,2.615 0.667,0.198 10 false for RHD:

Disconnect the accelerator pedal position sensor connector.


b.

Remove the 2 nuts and accelerator pedal.