Home › Engine / Hybrid System › 1VD-FTV (ENGINE CONTROL) › ACCELERATOR PEDAL › from 2015.08
RM2660E _51 Engine / Hybrid System _052773 1VD-FTV ENGINE CONTROL _0254996 ACCELERATOR PEDAL A

1VD-FTV ENGINE CONTROL  ACCELERATOR PEDAL  REMOVAL  


PROCEDURE

Hide 55606 1.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

Hide 78110K 2.REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

NOTICE:
·

Avoid excessive force to the accelerator pedal sensor.

·

Do not disassemble the accelerator pedal sensor assembly.

·

This accelerator pedal does not require lubrication.

Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

If applied, the accelerator pedal sensor assembly must be replaced.



a.
A372061E03
0.063,0.083 0.271,0.26 0.208,0.177 10 true *A 0.104,2.427 0.313,2.604 0.208,0.177 10 false *B

Disconnect the connector from the accelerator pedal position sensor assembly.

Text in Illustration
*A for LHD
*B for RHD


b.

Remove the 2 nuts and accelerator pedal position sensor assembly.