Home › Engine / Hybrid System › 1VD-FTV (ENGINE CONTROL) › MASS AIR FLOW METER (w/ DPF) › 2014.08–2015.08
RM2660E _51 Engine / Hybrid System _052773 1VD-FTV ENGINE CONTROL _0254998 MASS AIR FLOW METER(w/ DPF) G

1VD-FTV ENGINE CONTROL  MASS AIR FLOW METER(w/ DPF)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 22204 1.CHECK MASS AIR FLOW METER SUB-ASSEMBLY

a.

Check the mass air flow value.

i.

Connect the intelligent tester to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the intelligent tester on.


iv.

Enter the following menus: Powertrain / Engine / Data List / Primary / MAF.


v.
A204312

Blow air into the mass air flow meter and check that the mass air flow value fluctuates.

If the result is not as specified, check the wiring and ECM (See page Engine / Hybrid System>1VD-FTV (ENGINE CONTROL)>ECD SYSTEM (w/ DPF)>P0100).