Home › Engine / Hybrid System › 1GR-FE (ENGINE CONTROL) › SFI SYSTEM › 2014.08–2015.08
RM2660E _51 Engine / Hybrid System _052774 1GR-FE ENGINE CONTROL _0255001 SFI SYSTEM J

1GR-FE ENGINE CONTROL  SFI SYSTEM  Fuel Injector Circuit  


DESCRIPTION

The fuel injector assemblies are located on the intake manifold. They inject fuel into the cylinders based on the signals from the ECM.

WIRING DIAGRAM

A264510E03
5.56,0.537 5.841,0.693 0.281,0.156 10 #10 5.56,1.529 5.841,1.685 0.281,0.156 10 #20 5.56,2.522 5.841,2.678 0.281,0.156 10 #30 5.56,3.533 5.841,3.689 0.281,0.156 10 #40 5.56,4.543 5.841,4.699 0.281,0.156 10 #50 5.56,5.532 5.841,5.688 0.281,0.156 10 #60 5.551,6.193 5.854,6.349 0.304,0.156 10 E01 5.551,6.544 5.854,6.699 0.304,0.156 10 E02 5.819,7.111 6.741,7.267 0.922,0.156 10 C45*1, C46*2 5.819,7.279 6.192,7.435 0.373,0.156 10 ECM 1.572,5.509 2.345,5.695 0.773,0.186 10 *1: for LHD 1.572,5.817 2.345,6.003 0.773,0.186 10 *2: for RHD 1.572,6.135 3.452,6.321 1.880,0.186 10 *3: w/ Entry and Start System 1.572,6.453 3.526,6.638 1.954,0.186 10 *4: w/o Entry and Start System 5.311,6.742 5.495,6.892 0.184,0.150 10 42 5.311,6.392 5.495,6.541 0.184,0.150 10 43 5.237,5.726 5.494,5.875 0.257,0.149 10 107 5.314,4.729 5.495,4.882 0.180,0.152 10 84 5.237,3.731 5.494,3.880 0.257,0.149 10 108 5.311,2.715 5.495,2.864 0.184,0.149 10 85 5.23,1.728 5.494,1.877 0.263,0.149 10 109 5.318,0.724 5.495,0.866 0.177,0.142 10 86 4.233,0.534 4.344,0.686 0.111,0.152 10 1 3.311,0.516 3.422,0.668 0.111,0.152 10 2 4.233,1.539 4.344,1.692 0.111,0.152 10 1 4.233,2.522 4.344,2.674 0.111,0.152 10 1 4.233,3.528 4.344,3.680 0.111,0.152 10 1 4.233,4.539 4.344,4.691 0.111,0.152 10 1 4.233,5.525 4.344,5.678 0.111,0.152 10 1 4.853,0.538 4.968,0.694 0.114,0.156 10 2 3.07,0.516 3.184,0.671 0.114,0.156 10 1 0.589,1.873 0.703,2.029 0.114,0.156 10 1 4.853,1.543 4.968,1.699 0.114,0.156 10 2 4.853,2.523 4.968,2.679 0.114,0.156 10 2 4.853,3.527 4.968,3.683 0.114,0.156 10 2 4.853,4.537 4.968,4.693 0.114,0.156 10 2 4.853,5.521 4.968,5.677 0.114,0.156 10 2 4.093,0.89 5.408,1.067 1.316,0.177 10 No. 1 Fuel Injector 4.093,0.75 4.366,0.901 0.274,0.151 10 C5 4.093,2.735 4.366,2.885 0.274,0.151 10 C7 4.093,4.714 4.366,4.865 0.274,0.151 10 C9 4.093,1.918 5.314,2.095 1.221,0.177 10 No. 2 Fuel Injector 4.093,1.778 4.391,1.929 0.298,0.151 10 C16 4.093,5.724 4.391,5.874 0.298,0.150 10 C12 4.093,2.875 5.376,3.052 1.284,0.177 10 No. 3 Fuel Injector 4.093,3.919 5.376,4.096 1.284,0.177 10 No. 4 Fuel Injector 4.093,3.769 4.395,3.946 0.302,0.177 10 C14 4.093,4.853 5.432,5.030 1.339,0.177 10 No. 5 Fuel Injector 4.093,5.865 5.373,6.042 1.281,0.177 10 No. 6 Fuel Injector 3.136,0.746 3.389,0.908 0.253,0.163 10 INJ 1.558,1.414 1.840,1.570 0.282,0.156 10 IG2 0.591,0.795 1.254,0.956 0.662,0.161 10 IG2 MAIN 2.382,1.114 2.596,1.283 0.214,0.170 10 1B 2.38,0.625 2.594,0.795 0.214,0.170 10 1B 1.127,1.874 1.341,2.044 0.214,0.170 10 1B 0.31,1.874 0.525,2.044 0.214,0.170 10 1C 2.432,0.471 2.532,0.613 0.100,0.142 10 8 2.425,1.28 2.526,1.422 0.100,0.142 10 7 1.401,1.877 1.533,2.019 0.132,0.142 10 6 1.047,2.721 1.219,2.863 0.172,0.142 10 11 1.628,2.056 2.756,2.239 1.128,0.184 10 Integration Relay 1.074,2.941 1.437,3.106 0.362,0.165 10 IG2D 0.811,3.996 1.982,4.198 1.172,0.202 10 Main Body ECU*3 0.811,3.849 1.004,4.024 0.193,0.174 10 E2 2.525,2.721 2.649,2.863 0.124,0.142 10 6 2.547,2.941 2.826,3.106 0.279,0.165 10 IG2 2.24,3.996 3.337,4.177 1.098,0.181 10 Ignition Switch*4 2.24,3.849 2.548,4.024 0.308,0.174 10 E93 0.64,6.518 1.115,6.702 0.474,0.184 10 Battery

CAUTION / NOTICE / HINT

NOTICE:

Inspect the fuses for circuits related to this system before performing the following inspection procedure.


PROCEDURE

1.CHECK FUEL INJECTOR ASSEMBLY (POWER SOURCE)
a.
U163310E02
0.135,0.125 0.323,0.271 0.188,0.146 10 false *a 0.146,0.802 0.354,0.948 0.208,0.146 10 false C5 0.542,0.823 0.823,0.969 0.281,0.146 10 false C16 0.135,1.104 0.333,1.25 0.198,0.146 10 false C7 0.542,1.104 0.823,1.25 0.281,0.146 10 false C14 0.135,1.406 0.344,1.552 0.208,0.146 10 false C9 0.552,1.417 0.833,1.563 0.281,0.146 10 false C12

Disconnect the fuel injector assembly connector.


b.

Turn the ignition switch to ON.


c.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Cylinder Tester Connection Switch Condition Specified Condition
No. 1 C5-1 - Body ground Ignition switch ON 11 to 14 V
No. 2 C16-1 - Body ground Ignition switch ON 11 to 14 V
No. 3 C7-1 - Body ground Ignition switch ON 11 to 14 V
No. 4 C14-1 - Body ground Ignition switch ON 11 to 14 V
No. 5 C9-1 - Body ground Ignition switch ON 11 to 14 V
No. 6 C12-1 - Body ground Ignition switch ON 11 to 14 V


Text in Illustration
*a Front view of wire harness connector
(to Fuel Injector Assembly)


d.

Turn the ignition switch off.



OK

2.INSPECT FUEL INJECTOR ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR (INTEGRATION RELAY (IG2) - FUEL INJECTOR ASSEMBLY)

2.INSPECT FUEL INJECTOR ASSEMBLY
a.

Inspect the fuel injector assembly (See page Engine / Hybrid System>1GR-FE (FUEL)>FUEL INJECTOR>INSPECTION).



OK

3.CHECK HARNESS AND CONNECTOR (FUEL INJECTOR ASSEMBLY - ECM)

NG

REPLACE FUEL INJECTOR ASSEMBLY

3.CHECK HARNESS AND CONNECTOR (FUEL INJECTOR ASSEMBLY - ECM)
a.

Disconnect the fuel injector assembly connector.


b.

Disconnect the ECM connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
for LHD
Cylinder Tester Connection Condition Specified Condition
No. 1 C5-2 - Body ground Always 10 kΩ or higher
C5-2 - C45-86 (#10) Always Below 1 Ω
No. 2 C16-2 - Body ground Always 10 kΩ or higher
C16-2 - C45-109 (#20) Always Below 1 Ω
No. 3 C7-2 - Body ground Always 10 kΩ or higher
C7-2 - C45-85 (#30) Always Below 1 Ω
No. 4 C14-2 - Body ground Always 10 kΩ or higher
C14-2 - C45-108 (#40) Always Below 1 Ω
No. 5 C9-2 - Body ground Always 10 kΩ or higher
C9-2 - C45-84 (#50) Always Below 1 Ω
No. 6 C12-2 - Body ground Always 10 kΩ or higher
C12-2 - C45-107 (#60) Always Below 1 Ω

for RHD
Cylinder Tester Connection Condition Specified Condition
No. 1 C5-2 - Body ground Always 10 kΩ or higher
C5-2 - C46-86 (#10) Always Below 1 Ω
No. 2 C16-2 - Body ground Always 10 kΩ or higher
C16-2 - C46-109 (#20) Always Below 1 Ω
No. 3 C7-2 - Body ground Always 10 kΩ or higher
C7-2 - C46-85 (#30) Always Below 1 Ω
No. 4 C14-2 - Body ground Always 10 kΩ or higher
C14-2 - C46-108 (#40) Always Below 1 Ω
No. 5 C9-2 - Body ground Always 10 kΩ or higher
C9-2 - C46-84 (#50) Always Below 1 Ω
No. 6 C12-2 - Body ground Always 10 kΩ or higher
C12-2 - C46-107 (#60) Always Below 1 Ω




OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR