Home › Engine / Hybrid System › 1GR-FE (ENGINE CONTROL) › CAMSHAFT OIL CONTROL VALVE
RM2660E _51 Engine / Hybrid System _052774 1GR-FE ENGINE CONTROL _0255009 CAMSHAFT OIL CONTROL VALVE A

1GR-FE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  INSTALLATION  


PROCEDURE

Hide 15340 1.INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side of Bank 2)

a.

Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve.


b.

Install the camshaft timing oil control valve with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve (surface which contacts the cylinder head).

·

Be careful that the O-ring is not cracked when installing the camshaft timing oil control valve.




c.

Connect the camshaft timing oil control valve connector.


Hide 15330B 2.INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side of Bank 2)

a.

Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve.


b.

Install the camshaft timing oil control valve with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve (surface which contacts the cylinder head).

·

Be careful that the O-ring is not cracked when installing the camshaft timing oil control valve.




c.

Connect the camshaft timing oil control valve connector.


Hide 15330B 3.INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side of Bank 1)

a.

Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve.


b.

Install the camshaft timing oil control valve with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve (surface which contacts the cylinder head).

·

Be careful that the O-ring is not cracked when installing the camshaft timing oil control valve.




c.

Connect the camshaft timing oil control valve connector.


Hide 15330B 4.INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side of Bank 1)

a.

Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve.


b.

Install the camshaft timing oil control valve with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve (surface which contacts the cylinder head).

·

Be careful that the O-ring is not cracked when installing the camshaft timing oil control valve.




c.

Connect the camshaft timing oil control valve connector.


Hide 25702B 5.INSTALL NO. 2 EMISSION CONTROL VALVE SET (w/ Secondary Air Injection System)