Home › Engine / Hybrid System › 1GR-FE (ENGINE CONTROL) › IGNITION COIL AND SPARK PLUG
RM2660E _51 Engine / Hybrid System _052774 1GR-FE ENGINE CONTROL _0255011 IGNITION COIL AND SPARK PLUG A

1GR-FE ENGINE CONTROL  IGNITION COIL AND SPARK PLUG  REMOVAL  


PROCEDURE

Hide 2.REMOVE AIR CLEANER CAP AND HOSE

a.

Remove the air cleaner cap and hose.

i.
A267624

Disconnect the mass air flow meter connector, vacuum hose and No. 2 PCV hose and detach the clamp.


ii.

Loosen the clamp.


iii.

Unfasten the 4 hook clamps, and then remove the bolt and the air cleaner cap and hose.



Hide 17361 4.REMOVE AIR TUBE (w/ Secondary Air Injection System)

Hide 25701B 5.REMOVE NO. 1 EMISSION CONTROL VALVE SET (w/ Secondary Air Injection System)

Hide 17362 6.REMOVE NO. 2 AIR TUBE (w/ Secondary Air Injection System)

Hide 25702B 7.REMOVE NO. 2 EMISSION CONTROL VALVE SET (w/ Secondary Air Injection System)

Hide 19500 8.REMOVE IGNITION COIL ASSEMBLY

a.
A272605E02
0.063,0.063 0.292,0.25 0.229,0.188 10 true *A 1.813,0.063 2,0.208 0.188,0.146 10 false *B

Disconnect the 6 ignition coil connectors.

Text in Illustration
*A Bank 1
*B Bank 2


b.

Remove the 6 bolts and 6 ignition coils.


Hide 19100P 9.REMOVE SPARK PLUG

a.

Remove the 6 spark plugs.